Integrating your REELEX equipment with an existing extrusion line is very easy given you have the other hardware ready. You will want to consider the following.
- How are you printing on the wire? If you are planning on using our automated cut and transfer equipment, WE HIGHLY RECOMMEND YOU PRINT ON THE EXTRUSION LINE!
- Sequential Print Input: This will command the machine when to transfer and cut, please check your manuals electrical schematic drawings. Follow this link!
- Accumulator "Crash" circuit: This will open your crash stop circuit on your extrusion line.
- REELEX Accumulator Link
If you plan on using a different footage counter than the one provided to you by REELEX, please, feel free contact firstname.lastname@example.org for assistance integrating it with your machine. There are some details that will need to be confirmed.